Koi Care - Formaldehyde

• Products
• Koi & Pond
• Koi Care
• Koi Care - Formaldehyde

Treats: White spot, Trichodina, Costia and Chilodonella.

When to use?
When fish show symptoms of a parasitic infection, including white spots along the fins and body, flicking and rubbing, gasping at the surface, or an opaque film over the body.

Formaldehyde is highly effective at treating parasites due to its ability to penetrate through the mucus layer, reaching those parasites which would otherwise be protected from alternative bath treatments. It can also be used in conjunction with Malachite to treat protozoan parasites more effectively.

How to use?

• Test your water quality using NT Labs Test Kits.
• Mix the appropriate dosage in a clean bucket of pond water, pour evenly over the surface of the pond and leave for 7 days. Switch off UV filtration for 5 days. Aerate the pond well during treatment.
• If you feel a repeat dose is necessary, check your diagnosis carefully using the Diagnosis Tool; a different medication may be more suitable. Allow 7 days and perform a partial water change before re-treating or treating with a different medication.
• Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction.
• If required, mix with Malachite prior to adding to the pond, following the instructions above.

Warning:
Do not use with orfe, rudd, tench or sturgeon/sterlet.
Do not use if the water temperature is above 30°C.
Do not use in hot, humid, thundery conditions.
Do not mix medications, other than combining with Malachite.

FAQs:
Q: How do I mix Formaldehyde & Malachite Green? A: If you are going to use these 2 products together then simply follow the instructions for each individual product, there is no need to adjust the dosage or to pre-mix the 2 treatments, you can simply apply one product followed by the other at the dosage on the instructions. Alternatively, for ease of use we would recommend using our pre-mixed F-M-G.

For common frequently asked questions, click here.

Related Products

Looking for more? Find our Medikoi range here.

Specifications

Composition

Active Ingredients: Formaldehyde 30.0 % w/v 

Available in the following variations:

250ml, 500ml, 1 Litre & 2.5 Litre

Let us calculate your dosage for you!

To make the process of using our products even easier this handy dosage calculator tells you the amount you will need to put into your system. Please ensure you also read the instructions and warnings that are written on the bottle/pack label.

Note: This calculator does not take into account water displacement such as that caused by substrate, ornaments, water features and plants etc. Therefore, please adjust the calculated volume accordingly.

I know my system's measurements and want to:

*Always follow the instructions on the label. This calculator is intended to be used only as a guide to how much product you need to buy to treat your system. It does not account for displacement caused by gravel, rocks, ornaments, or any other objects in the tank, and does not include the volume of any external filtration system. The result assumes the aquarium/pond is filled to the brim. NT Laboratories Ltd. will not accept any responsibility for inaccuracies or misuse of this guide.